Jay Fisher - Fine Custom Knives

"Argiope" Fine Combat, Tactical Knife

• Size: Knife: Length overall: 13.0" (33.0 cm), Blade Length: 8.25" (20.9 cm), Thickness: .243" (6.2 mm)
• Weight: Knife: 16.0 oz. Sheath: 11 oz.
• Blade: O-1 Tungsten-Vanadium Alloy Steel, Hardened and Tempered to Rockwell C59, mirror finished, hot blued
• Bolsters, Fittings: Nickel Silver, Satin Finished
• Handle: Ebony Exotic Hardwood
• Sheath: Locking; Kydex, Aluminum, Stainless Steel
• Details: This is one of my popular combat tactical models, with a rich mirror finish on a jet-black hot blued O-1 tool steel blade. The Argiope has a proven record in combat with my professional military clients, and the knife is full and volatile in the hand with a thick, meaty quarter-inch thick blade, and a half-length top spine swage for reduced point angle geometry without sacrificing strength. I left plenty of thickness in the deep hollow grind for good edge support, and the long recurve edge is razor keen. The blade has a mirror polish, and then a full hour of deeply penetrating sodium caustic professional hot bluing leaves a passive surface that inhibits corrosion and is midnight black. The knife has a deep forefinger quillon (when held in a traditional grip style) and the curvaceous handle melds to the hand. The filework is abrupt, deep and punchy, full along the spine and inside the handle. The rear finger ring has a 1" center for comfort, and is polished inside and out for smooth operation. This knife is designed to be pulled from the sheath in a reverse tactical grip style, with the forefinger locking the knife to the hand in a decisive defensive grip. This is a devastating weapon, and the "pistol grip" angle of the blade to handle enhances security, aiming the blade without twisting the wrist, allowing a locked, "square fist" position in use. The bolsters and pins are low care, warm-looking nickel silver with a satin finish that matches the smooth and polished surface of the Ebony exotic hardwood, dovetailed and locked under the bolster edges, pinned, sealed and secured. The bolsters are sculpted and polished on the faces for easy care.
• Sheath: The sheath is one of my locking and waterproof combat grade models; I'll pit my combat sheaths against any other made for durability and quality. You can see that I take my combat sheaths seriously, with 5052H32 corrosion resistant aluminum welts .250" thick supporting the frame of the sheath, and double thickness .125" kydex (methylacrylate and polyvinylchloride) thermoformed around the knife. The locking mechanism is all stainless steel, including a stainless spring, retaining plate, fasteners, and lock and anchor tang. The entire sheath is secured with hardened blued screws and Chicago screws, with die-hardened and formed aluminum belt loops.
• This is a fine combat grade weapon, custom made for a great client.

Thanks, P. F.!